Products
brigano builds technical products for pool technology. The first is the E-Pool valve, the electric rod valve for backwashing. More will follow as soon as they meet the four development goals.
E-Pool valve DN 50
5-way rod valve with electric drive. Preferred series with port spacing 140, 190 and 230 mm, solvent sockets Ø 63 mm. Further sizes and the 3-way version will follow depending on market feedback.
Prototype October 2026 · pilot series spring 2027 · available from Q4 2027
How it works in three steps
Technical data E-Pool valve
Preliminary values, prototype status October 2026. Subject to change.
| Valve | |
| Design | 5-way stacked rod valve, vertical design, 3-way version in preparation |
| Nominal sizes | DN 50 / Ø 63 mm, further sizes in preparation |
| Operating pressure | max. 3.5 bar, same as the pneumatic rod valve |
| Medium | Fresh water, chlorinated pool water, salt water from salt electrolysis up to 5 g/l salt |
| Water temperature | 0 to 50 °C |
| Ambient temperature | -5 to 40 °C |
| Materials | Body PVC-U, seals EPDM and PTFE, rod duplex stainless steel 1.4462 |
| Drive and control | |
| Connection | 24 V DC |
| Switching time | under 10 s |
| Interface | Digital inputs and outputs 24 V, PLC-compatible: sequence, speed (PWM), direction, end of motion (ready), home, fault CAN interface for home automation USB for diagnostics and service |
| Display and operation | Display for status and faults, six buttons for manual operation |
| Power failure | Return via built-in energy storage, drive holds position without power |
| Protection rating head | IP65 |
| Dimensions and weight | Total length 783 mm at 230 mm port spacing, body Ø 77 mm, drive head 100 x 136 x 235 mm, 4.8 kg |
| Origin | Developed and manufactured in Switzerland |
| Standards | CE, RoHS, EN 13451 |
Downloads
Full range
The other sizes are in progress. The dimension sheets will be published here as soon as the design is final.
More products
The pool valve is the first brigano product. Further sizes, the 3-way version and additional products for the plant room are in preparation. Tell us what you need next, ideally in the Survey.
Become a preferred customer
We are taking on a limited number of preferred customers. You contribute your requirements for control, interfaces and future functions and receive the first pre-series valves from summer 2027. Pilot series testing takes place in spring 2027 at Woodtli Schwimmbadtechnik.
You get preferential terms, a direct line to engineering and, if you wish, a mention as a reference. We get your requirements from the field.
What helps us most is the survey, about 10 minutes. Or directly by e-mail: info@prolim.ch